ITS-AX3 Loop Detector Replaced Barrier Gate Millimeter Wave Radar Sensor
User Manual：
- Product Description
-
- Commodity name: ITS-AX3 Loop Detector Replaced Barrier Gate Millimeter Wave Radar Sensor
ITS-AX3 millimeter wave radar can detect vehicle on exit of barrier gate and replace in ground vehicle inductive loop detector with precisely detection and easy installation.
Introduce Details
ITS-AX3 millimeter wave radar can detect vehicle on exit of barrier gate with precisely detection and easy installation, which can replace traditional in ground vehicle inductive loop detector. The barrier gate anti-fall radar can precisely control the up and down of boom gate by cooperative working with barrier controller while vehicle detected. By this way, vehicle safety can be ensured.
The radar is mounted on barrier gate wall and do not need to damage ground for installation. It is much more precisely detected and convenient than traditional loop detector.
By the upgraded design that integrated software and hardware, this product can precisely distinguish human/car passing by to avoid the damage to car, injury to human, or no-falling condition.
Applications
For straight barrier gate only.
Characteristics
1. No Damage to Ground.
Mounted on barrier wall for use directly and no need to damage to cut ground as loop detector.
2. All Weather Working.
High protection level with newest algorithm which can switch weather condition automatically. Be adapted to different weather.
3. Stable & Accurate Detection
The antenna pitch angle turns narrow from ±15° to ±9°. The focused beam wave makes human/vehicle detection be more stable.
The radar applies high frequency 79GHz millimeter wave radar, which is much more accurate detected than traditional loop detector.
4. One-click Upgrade/Debugging
The radar support bluetooth data adjust. Also Microbrain has self-designed APP for one-click remote data set, upgrade & debug.
Product Parameters
Parameters
Value
Voltage
9-24V DC (typical value 12V/1A)
Work Temperature
-40℃~ +85℃
Power Consumption
< 2.8W
Frequency
79GHz
Waterproof Level
IP55
Connect Interface
RS485; Bluetooth
Size
107.9*73.6*17.2mm
Weight
132.4g
Horizontal Width
±0.5~±1.5m
Vertical Length
1~6m (3m default)
Data Adjust
RS485; Bluetooth
Upgrading
RS485; Bluetooth
Installation Video
The install steps for millimeter-wave barrier gate radar is much more easier than traditional loop detector:
1. No need to damage ground;
2. Easy for repair;
3. Save labor cost.
Related Products
Contact us freely if you want to know more about this product！
