Millimeter wave motorcycle radar detector
User Manual：
- Product Description
-
- Commodity name: Millimeter wave motorcycle radar detector
MOT-B30 motorcycle radar detector uses advanced 79GHz millimeter wave radar technology to detect vehicles and person. It provides danger early warning to ensure riding safety.
MOT-B30 motorcycle radar detector uses advanced 79GHz millimeter wave radar technology with famous TI chip integrated. During motorcycle running, the radar can detect the distance and speed of vehicles and person, and automatically analysis whether there's danger denpending on data received. While danger detected, the system would provide early warning like sounds alarm and indicator alarm for reminding to ensure riding safety.
Characteristics
Parameters
Technical indicators
System Properties
Working Voltage (V)
9V- 16V DC
Working Temperature (℃)
-40~ 80
Power Consumption (W)
2.5
Protection Level
IP67
Frequency Band (GHz)
79
Refresh Rate (Hz)
20
Interface
TTL serial port
Size (mm)
28.2*28.2*22
Detection erformance
Distance Resolution (m)
0.2
Speed Resolution (m/s)
0.2
Speed Limited (km/h)
±200
Distance Accuracy (m)
±0.2
Speed Accuracy (m/s)
±0.2
Angle Accuracy (°)
±1
Detection Distance (m)
50
Antenna Performance
Horizontal Beam Width (°)
±55
Pitch Beam Width (°)
±25
Input Signal
1TX*4RX
Output Signal
1 way buzzer, 1 way alarm light
The alarm area consider the motorcycle rear as center. X indicates horizontal distance, Y indicates vertical distance. Center towards left distance as negative, center towards right distance as positive.
Blind Spot Detection - BSD
Function: To remind driver not to change lane while there’s vehicle be too close on lane side or behind motorcycle.
For blind spot detection, the detection area is divided into 2 parts: 4.4m left/right (no warning for ±0.5m in center) and 10m in the rear. While there’s vehicle in blind spot area detected, the early warning is activated with LED indicator on; If use turn signal now, then alert level improve with buzzer on and LED indicator on this side flashing.
◆ System Activated Speed: V≥10Km/h
◆ Horizontal Alarm Area: 0.5m≤X≤4.4m，-4.4m≤X≤-0.5m
◆ Vertical Alarm Area: 0 m≤Y≤10m
◆ Targets: overtaking vehicles; Being overtaken vehicles; Same speed vehicles around.
◆ Alarm Activated: any targets detected in alarm area.
Lane Change Assistance - LCAFunction: To remind driver not to change lane while there’s vehicle approaching.
For lane changing, the LCA detection distance is in 50m. While there’s vehicle approaching with collision time TTC ≤5s, the LED indicator on this side will keep on; And if use turn signal towards now, then alert level improve with buzzer on and LED indicator on this side flashing.
◆ Horizontal Alarm Area: 0.5m≤X≤4.4m，-4.4m≤X≤-0.5m
◆ Vertical Alarm Area: 0m＜Y≤50m
◆ Alarm Condition: TTC≤5.0s
Active Overtaking Alert - AOA◆ System Activated Speed: V≥10km/h
◆ Horizontal Alarm Area: 0.5m≤X≤4.4m，-4.4m≤X≤-0.5m
◆ Vertical Alarm Area: 0m＜Y≤10m
◆ Alarm Activated: any target detected in alarm area.
Related Products
Contact us freely if you want to know more about this product！
