ITS-TX2 Trigger barrier gate arm opener vehicle proximity sensor
User Manual：
- Product Description
-
- Commodity name: ITS-TX2 Trigger barrier gate arm opener vehicle proximity sensor
The ITS-TX2 trigger radar is developed for the barrier gate vehicle proximity sensor and arm opener. It is used for the entrance and exit management in parking lots and underground garages.
Product Details
The ITS-TX2 trigger radar is developed for the application needs of entrance and exit management in parking lots and underground garages. Mainly used for the barrier gate vehicle proximity sensor and arm opener. It can detect whether there are typical targets such as cars and pedestrians in the entrance and exit areas in various complex environments, thereby guiding the camera system to complete functions such as license plate recognition of incoming vehicles;
ITS-TX2 radar adopts a highly integrated solution, with the characteristics of small size, high precision, simple debugging, easy installation, high stability, all-day and all-weather operation.
The radar operates at a frequency of 79GHz. Through the joint optimization design of software and hardware, this product can accurately identify and distinguish targets such as people and vehicles in the parking lot entry and exit area.
Product Advantages
Stable Performance
The boom gate sensor is millimeter wave technology radar with the highly integrated TI chip SOC scheme, which has the characteristics of small size, low cost, all-weather working capability, high sensitivity, high precision, very good stability and reliability.
Easy Above-ground Installation
The radar is installed above-ground on a barrier housing, wall or pole. It help to realize a less invasive solution for many locations where a ground loop is not possible or even allowed. Labar saved, ground protected and operation convenient.
Vehicle/Human Distinguish
By parameter set, the sensor can determine whether to detect passing person or not to satisfy various needs.
Detection Area Set by Mobile APP
Anti collision mode sensor default detection length is 3m in front and 0.5m left & right side. Trigger mode sensor default detection length is 1.9m in front and 0.5m left & right side. Different detection areas can be configured via Microbrain Self-developed mobile APP or laptop debugging software.
Configuration parameters saving and reload
Configuration such as detection area can be automatically saved, and the latest configuration parameters will be loaded after sensor power off and restart.
Firmware Upgrade
The firmware can be upgraded online through App or RS-485. No need to dismantle the sensor, and the new firmware will be effective just by restarting the sensor power.
Model Details
Name: ITS-TX2 Trigger Radar
Function: Barrier gate vehicle proximity arm opener
Applied Arms: Support all types of barrier gates
Working Frequency: 79GHz Millimeter Wave
Protection Level: IP55
Performance
Parameters
Value
Sensor Performance
Working Voltage
9~24V DC(Typical value 12V/1A)
Working Temperature
-40℃~+85℃
Power Consumption
< 2.8W
Frequency
79GHz
Protection Level
IP55
Interface
RS485; Bluetooth
Size (mm)
107.9*73.6*17.2
Weight (g)
132.4g
Detection Range
Horizontal Width (m)
±0.5~±1.5m (Configurable)
Vertical Length (m)
2~6m (default 3m)
System Upgrade
Online Debugging
RS485; Bluetooth
Online Upgrading
RS485; Bluetooth
Applied Gates
ITS-TX2 radar can be used for all types of barrier gate arms.
Advertising Barrier Gate
Fence Barrier Gate
Straight Barrier Gate
Telescopic Barrier Gate
Application Show
Besides the ITS-TX2 trigger radar, Microbran also supplies the anti-collision radar sensor types to ensure the passing safety of vehicles and pedestrain. Models includes ITS-AX1, ITS-AX2, ITS-AX3 and ITS-AX3-4. By cooperative working of trigger and anti-collision barrier gate sensor, users can realize the perfect vehicle proximity sensor and parking lot gate arm control. Application function shows as below:
Installation Steps
Compared to traditional barrier gate sensors, the millimeter-wave radar sensor can be installed on barrier gate or wall directly, which is really convenient and will not damage any ground.
Contact us freely if you want to know more about this product！
